Serving Chennai · Ponneri · Gummidipoondi · Tiruvallur · Avadi & the AP–TN border belt +91 90039 03003 WhatsApp Mon–Sat, 9:30 AM – 6:30 PM
West Chennai · Chennai, Tamil Nadu · factory-direct

SWR Pipe Price in Anna Nagar

SWR Pipe price in Anna Nagar is about ₹570 per 3 m pipe (fittings extra), our indicative rate as of 5 October 2026. We supply it factory-direct: the manufacturer ships it to your site in Anna Nagar and we bill it, confirming the brand and the day's rate with each order. Call +91 90039 03003 to order.

₹570 / 3 m pipe, our indicative rate 5 Oct 2026 price date Factory-direct shipped to your site
WhatsApp
SWR Pipe in Anna Nagar: Stack of plastic pipes (stock photo)
SWR Drainage Pipes · Anna Nagar
Quick answers

Quick answers: SWR Pipe in Anna Nagar

Is there an SWR pipe supplier near me in Anna Nagar?
Call +91 90039 03003 or WhatsApp: M&B Chetty India supplies SWR pipes in Anna Nagar (PIN 600040), and the manufacturer ships it factory-direct to your site.
Who delivers SWR pipes near Anna Nagar?
We do: you buy from M&B Chetty India, the seller, for sites in Anna Nagar and next door in Thirumangalam (0.8 km away) and Anna Nagar West (0.9 km), at the same rate, about ₹570 per 3 m pipe.
Can I get SWR pipes in Anna Nagar?
Yes, anywhere in Anna Nagar (West Chennai, Chennai district, PIN 600040): we take your order for Anna Nagar, the manufacturer ships it factory-direct to your site, and we bill it.
Where can I find a cheap SWR pipe supplier in Anna Nagar?
₹570 per 3 m pipe for Anna Nagar, our indicative rate, about 5% below the Chennai market rate we checked; the brand changes the price, so the sales desk confirms it with each order. Compare quotes on the same basis: per 3 m length; fittings extra; GST basis not stated.
What is the price of SWR pipes in Anna Nagar?
About ₹570 per 3 m pipe for SWR drainage pipe 110 mm, 3 m length (Type A, ring-fit) in Anna Nagar, as of 5 October 2026 (per 3 m length; fittings extra; GST basis not stated); grades sold per 3 m pipe run from ₹285 to ₹570.
What is the SWR pipe rate per 3 m pipe in Anna Nagar?
The rate we quote for Anna Nagar is ₹570 per 3 m pipe for SWR drainage pipe 110 mm, 3 m length (Type A, ring-fit) (per 3 m length; fittings extra; GST basis not stated); we supply it factory-direct and confirm the brand and the rate with each order.
What is today's SWR pipe price in Anna Nagar?
See our SWR Pipe rate today page for the dated daily rate for Chennai; our price list of 5 October 2026 puts SWR pipes for Anna Nagar at ₹570 per 3 m pipe, and a call to +91 90039 03003 confirms it for your order.

+91 90039 03003 WhatsApp Directions to our sales desk

Our indicative rate

SWR Pipe price in Anna Nagar: every grade and size

SWR Drainage Pipes in Anna Nagar: our rate by grade and size
Grade / sizeIndicative rateUnitPrice as of
SWR drainage pipe 110 mm, 3 m length (Type A, ring-fit)₹570per 3 m pipe5 Oct 2026
SWR drainage pipe 75 mm, 3 m length₹285per 3 m pipe5 Oct 2026

Basis: Per 3 m length; fittings extra; GST basis not stated. Our indicative rate as of 5 October 2026, about 5% below the Chennai market rate we checked; the brand changes the price, and we confirm it with each order. The same rate applies across our Chennai delivery zones; today's SWR Pipe rate carries the dated daily figure.

How SWR pipes reach Anna Nagar

M&B Chetty India is the seller: we take your order for Anna Nagar, the manufacturer ships it factory-direct to your site, and we bill it. The brand changes the price, so we confirm it and the day's rate with each order.

Lead time and minimum quantity: confirmed with your order for Anna Nagar; we do not publish a fixed lead time for SWR pipes.

Our crushed stone for the same site: Anna Nagar is about 95 km and 3–3.5 h by truck from our crusher at Perindesam. Jalli, M-Sand and the other crushed stone for the site are priced on our Anna Nagar area page.

How we supply it: M&B Chetty supplies SWR pipes and fittings factory-direct, billed by us. For the outside inspection chambers and drain beds, the 20 mm jalli, M-Sand and crusher dust come from us.

Photo: Stack of plastic pipes (Ries Bosch on Unsplash; a stock photo for the plumbing & sanitary range, see image credits).

SWR Pipe for Anna Nagar buildings

What is being built in Anna Nagar: Apartment buildings replacing older independent houses; Commercial blocks on 2nd Avenue and the main roads.

About Anna Nagar

Anna Nagar is a planned residential township in west-central Chennai, laid out in blocks with wide avenues, the Tower Park and a busy 2nd Avenue commercial strip, and served by the Green Line metro. Older independent houses are being replaced by apartment buildings and commercial blocks.

Anna Nagar (அண்ணா நகர்) · West Chennai · Chennai, Tamil Nadu · PIN 600040 · landmarks: Anna Nagar Tower Park, 2nd Avenue, Anna Nagar Tower metro station

Type A or Type B?

For SWR pipes, the choice comes before the quantity:

Type B for every soil and waste line, buried run and exposed stack; Type A only for rainwater downpipes and vent pipes. Use ring-fit joints on long stacks that take full sun.
  • WC soil branch and soil stack: 110 mm
  • Basin, sink and floor-trap waste: 75 mm is common
  • Horizontal drains: a steady fall, commonly about 1 in 40 to 1 in 60 for 100–110 mm lines

SWR Drainage Pipes: what it is, types, checks and quantities

Questions buyers ask

SWR Pipe in Anna Nagar: questions

Do you also supply SWR pipes to Thirumangalam, Anna Nagar West and Arumbakkam?

Yes. We take SWR pipe orders for sites in Thirumangalam, Anna Nagar West, Arumbakkam, Anna Nagar West Extension, Collector Nagar and Villivakkam as well, at the same rate as Anna Nagar, and the manufacturer ships it factory-direct to your site.

Who is the seller of SWR pipes for a site in Anna Nagar?

M&B Chetty India is the seller: we take your order for Anna Nagar, the manufacturer ships it factory-direct to your site, and we bill it (per 3 m length; fittings extra; GST basis not stated). The brand changes the price, so we confirm it with each order.

Which SWR pipe is best?

Type B for soil and waste lines, buried runs and anywhere pipes can be knocked; Type A only for rainwater downpipes and vents. Choose ring-fit joints on long vertical stacks so the pipe can expand in the sun.

What is the thickness of a Class B pipe?

It depends on the diameter. IS 13592 lists a minimum wall for each size, and Type B is always thicker than Type A of the same size. Check the type and size printed on the pipe and measure the wall at a cut end.

Need SWR pipes in Anna Nagar?

Call, WhatsApp or send the quote form with it filled in: we confirm the brand, the price and the date, and the manufacturer ships it direct to your site.

WhatsApp