Blue metal, sands and road-base materials — by size and use
We supply crushed stone from our Perindesam crusher and partner crushers in the belt (blue metal or jalli 6–53 mm, M-Sand, P-Sand, crusher dust, GSB, WMM) by the weighbridge tonne; wholesale stock from six yards (river sand, TMT bars, blocks and bricks) at factory-direct prices; and cement, paints, tiles and more through partner suppliers. Item pages give delivered prices.
ஜல்லி (6–53 மிமீ), எம் சாண்ட், பி சாண்ட், கிரஷர் டஸ்ட், ஜிஎஸ்பி, WMM — லாரி லோடு.
Ex-works rates, excl. royalty, transport & 5% GST. Full price list & estimator
Blue metal by nominal size
Blue Metal 20mm
The default RCC aggregate — slabs, beams, columns, footings, RMC.
Blue Metal 12mm
Thin sections, congested steel, pumped RMC blends, precast and blocks.
Blue Metal 6mm
Paver blocks, hollow blocks, precast, screeds and chip-seal.
Blue Metal 40mm
PCC beds, mass concrete, rafts, soling, drainage and yard filling.
Washed sands and crusher dust
M-Sand
Washed, Zone II concrete sand — consistent grading for RCC and RMC.
P-Sand
Finer, washed sand for wall plaster, rendering and fine mortar.
Crusher Dust
Paver bedding, block making, trench backfill, filling and GSB/WMM fines.
GSB, WMM / WBM and road metal for contractors
Blue Metal 53mm
WBM base courses, GSB top size, soling, gabions and ballast-type uses.
GSB (Granular Sub-Base)
Close-graded or drainage-graded sub-base for highways, layouts and yards.
WMM / WBM Aggregate
Base-course aggregate for highways, bypasses, estate and village roads.
River sand, TMT bars, blocks and bricks
Factory-direct wholesale prices — usually lower than retail dealers; final price negotiable on quantity. Delivered from the nearest yard or factory area holding the item.
River Sand
River sand (aatru manal), per unit of 100 cft
TMT Bars
TMT steel bars, Fe 500 / Fe 500D, 8–25 mm
Hollow Concrete Blocks
Hollow blocks, 4, 6 and 8 inch
Solid Concrete Blocks
Solid blocks, 4, 6 and 8 inch
Fly Ash Bricks
Fly ash bricks, 9 x 4 x 3 inch
Red Clay Bricks
Red clay chamber bricks (sengal)
Cement, finishes, fittings and services
We do not make or stock these. A local partner supplier quotes, supplies and bills them, and pays us a referral commission; we time them with your crushed-stone and stock deliveries.
Cement
OPC 53, PPC and PSC in 50 kg bags, arranged to arrive with your M-Sand and jalli.
Steel accessories
Binding wire, cover blocks and structural steel sections that go with your TMT order.
Ready-mix concrete
Transit-mixer concrete for slabs and footings, booked to your pour date.
Pavers & kerb stones
Interlocking pavers and precast kerbs for driveways, yards and compound roads.
Plastering & finishing
Wall putty, primer, interior and exterior paints, and tile adhesive.
Waterproofing & termite protection
Terrace and bathroom waterproofing and pre-construction anti-termite treatment.
Flooring & tiles
Vitrified and ceramic tiles and granite slabs.
Doors & windows
uPVC and aluminium windows, wooden main doors, flush doors and WPC/PVC bathroom doors.
Wood work
Plywood, decorative laminates, modular kitchens and wardrobes.
Plumbing & sanitary
CPVC, uPVC and SWR pipes, sanitaryware, bath fittings, water tanks and rainwater harvesting.
Electricals
House wires, modular switches, MCB/RCCB boards, LED lights and ceiling fans.
Electronics & home systems
Inverters, CCTV and solar water heaters.
Roofing sheets
Metal, polycarbonate and fibre-cement sheets for sheds and terrace covers.
Centering & shuttering
Slab centering sheets, props and shuttering plywood, hired or bought.
Glass
Toughened, laminated and float glass for windows, partitions and railings.
Ex-works rates per tonne
Add transport for your area and 5% GST; royalty at actuals. Every area page shows delivered prices.
| # | Material | Ex-works rate | Min. order | Request quote |
|---|---|---|---|---|
| 1 | Blue Metal 20mm16–24 mm fraction · 20 mm nominal, IS 383 graded | ₹475per MT · ex-works | 1 load (~18 T) | |
| 2 | Blue Metal 12mm8–16 mm fraction · 12.5 mm nominal, IS 383 graded | ₹450per MT · ex-works | 1 load (~18 T) | |
| 3 | Blue Metal 6mm3.5–8 mm fraction · tested as 10 mm single-size (IS 383) | ₹230per MT · ex-works | 1 load (~18 T) | |
| 4 | Blue Metal 40mm32–45 mm fraction · 40 mm nominal (IS 383) | ₹280per MT · ex-works | 1 load (~18 T) | |
| 5 | Blue Metal 53mm45–63 mm road-metal fraction (MoRTH sieve size) · supplied on request | ₹280per MT · ex-works | 1 load (~18 T) | |
| 6 | M-Sand0–4.75 mm washed · IS 383:2016 Zone II | ₹525per MT · ex-works | 1 load (~18 T) | |
| 7 | P-Sand0–2.36 mm washed · plaster sand grading to IS 1542 | ₹680per MT · ex-works | 1 load (~18 T) | |
| 8 | Crusher Dust0–4.75 mm crusher fines (unwashed) | ₹450per MT · ex-works | 1 load (~18 T) | |
| 9 | GSB (Granular Sub-Base)0–53 mm (Gradings II–VI) or 0–75 mm (Grading I) · MoRTH Section 401 | ₹425per MT · ex-works | 1 load (~18 T) | |
| 10 | WMM / WBM Aggregate53 mm down (WMM, MoRTH 406) · 63–45 / 53–22.4 mm coarse aggregate + screenings (WBM, MoRTH 404) | ₹450per MT · ex-works | 1 load (~18 T) |
Rates reviewed 2 October 2026
A quick guide before you order
| Work | Coarse aggregate | Sand | Notes |
|---|---|---|---|
| RCC slabs, beams, columns, footings (M20–M40) | 20mm (+ 12mm for RMC blends) | M-Sand Zone II | IS 456: max size ≤ ¼ of member thickness |
| Thin / congested sections, precast | 12mm | M-Sand | Lintels, chajjas, stairs |
| PCC beds, mass concrete, rafts | 40mm | M-Sand / dust as specified | 1:4:8, 1:3:6 |
| Plastering, rendering | — | P-Sand | IS 1542 grading |
| Paver / hollow blocks | 6mm chips (+12mm) | Crusher dust / M-Sand | Mixed loads available |
| Road sub-base and base | GSB, WMM / WBM, 53mm | Dust as screenings / fines | MoRTH 401 / 404 / 406 |
| Filling, bedding, trenches | 40mm, GSB | Crusher dust | Compacts to 2.0–2.15 t/m³ |
Not sure which grading your contract needs?
Send the drawing, BOQ line or mix design on WhatsApp. We confirm the size, grading and quantity per load before quoting.