Serving Chennai · Ponneri · Gummidipoondi · Tiruvallur · Avadi & the AP–TN border belt +91 90039 03003 WhatsApp Mon–Sat, 9:30 AM – 6:30 PM
West Chennai · Tiruvallur, Tamil Nadu · factory-direct

uPVC Pipe Price in Annanur

uPVC Pipe price in Annanur is about ₹57 per metre for uPVC pressure pipe, 1 inch, SCH 40 / class pipe (fittings extra), our indicative rate as of 5 October 2026, about 5% below the Chennai market rate we checked. The manufacturer ships it factory-direct to your site in Annanur. Call +91 90039 03003 or WhatsApp with the quantity.

₹57 / metre, our indicative rate 5 Oct 2026 price date Factory-direct shipped to your site
WhatsApp
uPVC Pipe in Annanur: Stack of plastic pipes (stock photo)
uPVC Water Pipes · Annanur
Quick answers

Quick answers: uPVC Pipe in Annanur

Where can I find uPVC pipe suppliers near me in Annanur?
M&B Chetty India takes uPVC pipe orders for sites across Annanur (PIN 600062), and the manufacturer ships it factory-direct to your site. Call +91 90039 03003 or WhatsApp with your site location.
Who delivers uPVC pipes near Annanur?
M&B Chetty India sells uPVC pipes in Annanur as well as nearby Thirumullaivoyal (1.3 km away) and Ayapakkam (1.9 km), at the same rate, about ₹57 per metre.
Where can I buy uPVC pipes in Annanur?
From us, for any site in Annanur (West Chennai, Tiruvallur district, PIN 600062): we take your order for Annanur, the manufacturer ships it factory-direct to your site, and we bill it.
Where can I find a cheap uPVC pipe supplier in Annanur?
Our uPVC pipe rate for Annanur is ₹57 per metre, our indicative rate, about 5% below the Chennai market rate we checked. The brand changes the price, so we confirm it with each order; compare quotes on the same basis (per metre or per kg of pipe; fittings extra; GST basis not stated).
What is the price of uPVC pipes in Annanur?
About ₹57 per metre for uPVC pressure pipe, 1 inch, SCH 40 / class pipe in Annanur, as of 5 October 2026 (per metre or per kg of pipe; fittings extra; GST basis not stated); the table lists the other grades and sizes with their own unit.
What is the uPVC pipe rate per metre in Annanur?
Our rate for Annanur is ₹57 per metre for uPVC pressure pipe, 1 inch, SCH 40 / class pipe (per metre or per kg of pipe; fittings extra; GST basis not stated). We supply it factory-direct and confirm the brand and the rate with each order.
What is the uPVC pipe price in Annanur today?
Our uPVC Pipe rate today page carries the dated daily rate for Chennai. Our price list of 5 October 2026 has uPVC pipes for Annanur at ₹57 per metre; call +91 90039 03003 to confirm it for your order.

+91 90039 03003 WhatsApp Directions to our sales desk

Our indicative rate

uPVC Pipe price in Annanur: every grade and size

uPVC Water Pipes in Annanur: our rate by grade and size
Grade / sizeIndicative rateUnitPrice as of
uPVC pressure pipe, 1 inch, SCH 40 / class pipe₹57per metre5 Oct 2026
PVC / uPVC pressure pipe sold by weight (2 inch and above)₹138per kg5 Oct 2026

Basis: Per metre or per kg of pipe; fittings extra; GST basis not stated. Our indicative rate as of 5 October 2026, about 5% below the Chennai market rate we checked; the brand changes the price, and we confirm it with each order. The same rate applies across our Chennai delivery zones; today's uPVC Pipe rate carries the dated daily figure.

How uPVC pipes reach Annanur

M&B Chetty India is the seller: we take your order for Annanur, the manufacturer ships it factory-direct to your site, and we bill it. The brand changes the price, so we confirm it and the day's rate with each order.

Lead time and minimum quantity: confirmed with your order for Annanur; we do not publish a fixed lead time for uPVC pipes.

Our crushed stone for the same site: Annanur is about 90 km and 3–3.5 h by truck from our crusher at Perindesam. Jalli, M-Sand and the other crushed stone for the site are priced on our Annanur area page.

How we supply it: M&B Chetty supplies uPVC pipes and fittings factory-direct, billed by us. For buried yard and sump lines, the bedding sand or crusher dust can come from us on a load you are already ordering.

Photo: Stack of plastic pipes (Ries Bosch on Unsplash; a stock photo for the plumbing & sanitary range, see image credits).

uPVC Pipe for Annanur buildings

What is being built in Annanur: Independent houses and small apartment blocks in the residential nagars; Floor additions and rebuilds of older houses.

About Annanur

Annanur is a neighbourhood of Avadi City Municipal Corporation on the suburban railway between Thirumullaivoyal and Avadi, with its own station and a railway colony that has a Railway Carshed Complex post office. Newer residential nagars such as Sivasakthi Nagar, laid out in sectors A to F, and Jothi Nagar have grown up around it, and new independent houses and small apartment blocks are still being built there.

Annanur (அண்ணனூர்) · West Chennai · Tiruvallur, Tamil Nadu · PIN 600062 · landmarks: Annanur railway station

Which class for which line

For uPVC pipes, the choice comes before the quantity:

Class 3 or 4 for anything a pump pushes or that is buried; never uPVC on hot water.

uPVC Water Pipes: what it is, types, checks and quantities

Questions buyers ask

uPVC Pipe in Annanur: questions

Do you also supply uPVC pipes to Thirumullaivoyal, Ayapakkam and Thiruvengada Nagar?

Yes. We take uPVC pipe orders for sites in Thirumullaivoyal, Ayapakkam, Thiruvengada Nagar, Ambattur OT, Ambattur and Avadi as well, at the same rate as Annanur, and the manufacturer ships it factory-direct to your site.

Who is the seller of uPVC pipes for a site in Annanur?

M&B Chetty India is the seller: we take your order for Annanur, the manufacturer ships it factory-direct to your site, and we bill it (per metre or per kg of pipe; fittings extra; GST basis not stated). The brand changes the price, so we confirm it with each order.

What do kgf/cm² ratings mean in metres of water?

1 kgf/cm² is roughly 10 m of water head. So Class 1 at 2.5 kgf/cm² is about 25 m, Class 3 at 6 is about 60 m and Class 6 at 12.5 is about 125 m of working pressure.

Which uPVC pipe class for the pump to the overhead tank?

Class 3 (6 kgf/cm²) or Class 4 (8 kgf/cm²) gives a comfortable margin over the pump's pressure and the surges when it starts and stops. Lower classes have thinner walls and crack more easily on impact.

Need uPVC pipes in Annanur?

Call, WhatsApp or send the quote form with it filled in: we confirm the brand, the price and the date, and the manufacturer ships it direct to your site.

WhatsApp