Door Hardware Price in Karanodai
Door Hardware price in Karanodai is about ₹57 per piece for SS 304 butt hinge, 4 inch (100 mm), screws extra, our indicative rate as of 5 October 2026, about 5% below the Chennai market rate we checked. The manufacturer ships it factory-direct to your site in Karanodai. Call +91 90039 03003 or WhatsApp with the quantity.
Today's Door Hardware rate (dated) · Directions to our sales desk · See Karanodai on the map
Quick answers: Door Hardware in Karanodai
- How do I find door hardware suppliers near me in Karanodai?
- M&B Chetty India takes door hardware orders for sites across Karanodai (PIN 600067), and the manufacturer ships it factory-direct to your site. Call +91 90039 03003 or WhatsApp with your site location.
- Who supplies door and window hardware near Karanodai?
- M&B Chetty India sells door and window hardware in Karanodai as well as nearby Sholavaram (4.1 km away) and Padiyanallur (5.4 km), at the same rate, about ₹57 per piece, with delivery outside our Chennai zones quoted per order.
- Where can I buy door and window hardware in Karanodai?
- From us, for any site in Karanodai (North Chennai, Tiruvallur district, PIN 600067): we take your order for Karanodai, the manufacturer ships it factory-direct to your site, and we bill it.
- Where can I find a cheap door hardware supplier in Karanodai?
- Our door hardware rate for Karanodai is ₹57 per piece, our indicative rate, about 5% below the Chennai market rate we checked. The brand changes the price, so we confirm it with each order; compare quotes on the same basis (per piece or set as listed by Chennai dealers; screws extra; GST basis not stated).
- What is the price of door and window hardware in Karanodai?
- About ₹57 per piece for SS 304 butt hinge, 4 inch (100 mm) in Karanodai, as of 5 October 2026 (per piece or set as listed by Chennai dealers; screws extra; GST basis not stated); the table lists the other grades and sizes with their own unit.
- What is the door hardware rate per piece in Karanodai?
- Our rate for Karanodai is ₹57 per piece for SS 304 butt hinge, 4 inch (100 mm) (per piece or set as listed by Chennai dealers; screws extra; GST basis not stated). We supply it factory-direct and confirm the brand and the rate with each order.
- What is the door hardware price in Karanodai today?
- Our Door Hardware rate today page carries the dated daily rate for Chennai. Our price list of 5 October 2026 has door and window hardware for Karanodai at ₹57 per piece; call +91 90039 03003 to confirm it for your order.
Door Hardware price in Karanodai: every grade and size
| Grade / size | Indicative rate | Unit | Price as of |
|---|---|---|---|
| SS 304 butt hinge, 4 inch (100 mm) | ₹57 | per piece | 5 Oct 2026 |
| Mortise handle lock set for a main door | ₹1,235 | per set | 5 Oct 2026 |
Basis: Per piece or set as listed by Chennai dealers; screws extra; GST basis not stated. Our indicative rate as of 5 October 2026, about 5% below the Chennai market rate we checked; the brand changes the price, and we confirm it with each order. The same rate applies across our Chennai delivery zones; today's Door Hardware rate carries the dated daily figure.
How door and window hardware reaches Karanodai
M&B Chetty India is the seller: we take your order for Karanodai, the manufacturer ships it factory-direct to your site, and we bill it. The brand changes the price, so we confirm it and the day's rate with each order.
Lead time and minimum quantity: confirmed with your order for Karanodai; we do not publish a fixed lead time for door and window hardware.
Our crushed stone for the same site: Karanodai is about 85 km and 2.5–3 h by truck from our crusher at Perindesam. Jalli, M-Sand and the other crushed stone for the site are priced on our Karanodai area page.
How we supply it: M&B Chetty supplies door and window hardware factory-direct, billed by us. We ask for the grade (304, 202 or brass) against every line of the quote, so any substitution is visible.
Photo: Wooden double door in an arched doorway (Ronald Cuyan on Unsplash; a stock photo for the hardware & fittings range, see image credits).
Door Hardware for Karanodai buildings
What is being built in Karanodai: Independent houses and plotted layouts along the highway; Village houses, compound walls and layout roads.
About Karanodai
Karanodai is a suburb on the GNT Road (NH16) about 7 km north of Red Hills, in Sholavaram block of Tiruvallur district, where the highway crosses the Kosasthalaiyar river on the Karanodai bridge. The road to Minjur branches off here, and villages such as Athur, Sothuperumbedu and Nerkundram lie around it. Building is mostly independent houses and plotted layouts along the highway and in these villages.
Karanodai (காரனோடை) · North Chennai · Tiruvallur, Tamil Nadu · PIN 600067 · landmarks: Karanodai bridge over the Kosasthalaiyar, GNT Road (NH16)
SS 304, SS 202, brass or zinc?
For door and window hardware, the choice comes before the quantity:
- Standard 2100 mm high door: 3 hinges
- Heavy or wide main door: 4 hinges, with bearings or washers
- Hinge size: 100 mm for internal doors, 125 mm for main doors
Door and Window Hardware: what it is, types, checks and quantities
Door Hardware in areas near Karanodai
Sholavaram
₹57per pieceTiruvallur district · PIN 6000675.4 km from KaranodaiPadiyanallur
₹57per piece, same rate as KaranodaiNorth Chennai · PIN 6000526.7 km from KaranodaiAlamathi
₹57per piece, same rate as KaranodaiNorth Chennai · PIN 6000526.8 km from KaranodaiRed Hills
₹57per piece, same rate as KaranodaiNorth Chennai · PIN 6000528.7 km from KaranodaiVilangadupakkam
₹57per piece, same rate as KaranodaiNorth Chennai · PIN 6000528.8 km from KaranodaiPammadukulam
₹57per piece, same rate as KaranodaiNorth Chennai · PIN 600052Neighbouring localities we also deliver to: Sholavaram, Padiyanallur, Alamathi, Red Hills, Vilangadupakkam, Pammadukulam
Door Hardware in Karanodai: questions
Do you also supply door and window hardware to Sholavaram, Padiyanallur and Alamathi?
Yes. We take door hardware orders for sites in Sholavaram, Padiyanallur, Alamathi, Red Hills, Vilangadupakkam and Pammadukulam as well, at the same rate as Karanodai, with delivery outside our Chennai zones quoted per order, and the manufacturer ships it factory-direct to your site.
Who is the seller of door and window hardware for a site in Karanodai?
M&B Chetty India is the seller: we take your order for Karanodai, the manufacturer ships it factory-direct to your site, and we bill it (per piece or set as listed by Chennai dealers; screws extra; GST basis not stated). The brand changes the price, so we confirm it with each order.
Which is better, 202 or 304 stainless steel?
304, for anything exposed to moisture or sea air: with about 8% nickel it resists rust much better. 202 replaces part of the nickel with manganese, costs less and suits dry interiors, but it can stain and rust in bathrooms and near the coast.
How many hinges should a door have?
Three for a standard 2100 mm high door and four for heavy or wide main doors. Use 100 mm hinges on internal doors and 125 mm on main doors, with screws of the same metal grade.
From our team
Notes, photos and examples added by the M&B Chetty team, with the author and the date.
More factory-direct items in Karanodai
- Wooden Main Door price in Karanodaidoors & windows
- uPVC Window price in Karanodaidoors & windows
- WPC and PVC Door price in Karanodaidoors & windows
Delivered with it in Karanodai
Door Hardware elsewhere
Need door and window hardware in Karanodai?
Call, WhatsApp or send the quote form with it filled in: we confirm the brand, the price and the date, and the manufacturer ships it direct to your site.
Karanodai area pageToday's Door Hardware rateDoor and Window Hardware