Serving Chennai · Ponneri · Gummidipoondi · Tiruvallur · Avadi & the AP–TN border belt +91 90039 03003 WhatsApp Mon–Sat, 9:30 AM – 6:30 PM
North Chennai · Tiruvallur, Tamil Nadu · factory-direct

Plywood Price in Red Hills

Plywood price in Red Hills is about ₹55 per sq ft for MR / commercial plywood (IS 303), 18 mm (supply only), our indicative rate as of 5 October 2026, about 5% below the Chennai market rate we checked. The manufacturer ships it factory-direct to your site in Red Hills. Call +91 90039 03003 or WhatsApp with the quantity.

₹55 / sq ft, our indicative rate 5 Oct 2026 price date Factory-direct shipped to your site
WhatsApp
Plywood in Red Hills: Stack of plywood sheets, edge view (stock photo)
Plywood · Red Hills
Quick answers

Quick answers: Plywood in Red Hills

Is there a plywood supplier near me in Red Hills?
Call +91 90039 03003 or WhatsApp: M&B Chetty India supplies plywood in Red Hills (PIN 600052), and the manufacturer ships it factory-direct to your site.
Who delivers plywood near Red Hills?
We do: you buy from M&B Chetty India, the seller, for sites in Red Hills and next door in Padiyanallur (1.5 km away) and Sholavaram (2.7 km), at the same rate, about ₹55 per sq ft, with delivery outside our Chennai zones quoted per order.
Where can I buy plywood in Red Hills?
From us, for any site in Red Hills (North Chennai, Tiruvallur district, PIN 600052): we take your order for Red Hills, the manufacturer ships it factory-direct to your site, and we bill it.
Where can I find a cheap plywood supplier in Red Hills?
₹55 per sq ft for Red Hills, our indicative rate, about 5% below the Chennai market rate we checked; the brand changes the price, so the sales desk confirms it with each order. Compare quotes on the same basis: per sq ft of sheet, supply only; GST not stated.
What is the price of plywood in Red Hills?
About ₹55 per sq ft for MR / commercial plywood (IS 303), 18 mm in Red Hills, as of 5 October 2026 (per sq ft of sheet, supply only; GST not stated); grades sold per sq ft run from ₹55 to ₹104.
What is the plywood rate per sq ft in Red Hills?
The rate we quote for Red Hills is ₹55 per sq ft for MR / commercial plywood (IS 303), 18 mm (per sq ft of sheet, supply only; GST not stated); we supply it factory-direct and confirm the brand and the rate with each order.
What is today's plywood price in Red Hills?
See our Plywood rate today page for the dated daily rate for Chennai; our price list of 5 October 2026 puts plywood for Red Hills at ₹55 per sq ft, and a call to +91 90039 03003 confirms it for your order.

+91 90039 03003 WhatsApp Directions to our sales desk

Our indicative rate

Plywood price in Red Hills: every grade and size

Plywood in Red Hills: our rate by grade and size
Grade / sizeIndicative rateUnitPrice as of
MR / commercial plywood (IS 303), 18 mm₹55per sq ft5 Oct 2026
BWR plywood, 18 mm₹80.50per sq ft5 Oct 2026
BWP / marine plywood (IS 710), 18–19 mm₹104per sq ft5 Oct 2026

Basis: Per sq ft of sheet, supply only; GST not stated. Our indicative rate as of 5 October 2026, about 5% below the Chennai market rate we checked; the brand changes the price, and we confirm it with each order. The same rate applies across our Chennai delivery zones; today's Plywood rate carries the dated daily figure.

How plywood reaches Red Hills

M&B Chetty India is the seller: we take your order for Red Hills, the manufacturer ships it factory-direct to your site, and we bill it. The brand changes the price, so we confirm it and the day's rate with each order.

Lead time and minimum quantity: confirmed with your order for Red Hills; we do not publish a fixed lead time for plywood.

Our crushed stone for the same site: Red Hills is about 83 km and 2.5–3 h by truck from our crusher at Perindesam (route: Perindesam → Uthukottai → Periyapalayam → Red Hills). Jalli, M-Sand and the other crushed stone for the site are priced on our Red Hills area page.

How we supply it: M&B Chetty supplies plywood factory-direct from the mill, billed by us. Your carpenter's cutting list goes with the order as it is, with the grade marked per room, and the sheets arrive after the plastering and flooring dust has settled.

Photo: Stack of plywood sheets, edge view (LUCIA LU on Unsplash; a stock photo for the wood work range, see image credits).

Plywood for Red Hills buildings

What is being built in Red Hills: RMC and precast cluster along the GNT Road and the Chennai Bypass; Residential layouts and houses around the Red Hills junction.

About Red Hills

Red Hills (Sengundram) is where the Periyapalayam road meets the GNT Road (NH16) and the Chennai Bypass — the natural unloading point for North Chennai's batching plants and precast yards.

Red Hills (செங்குன்றம்) · North Chennai · Tiruvallur, Tamil Nadu · PIN 600052 · landmarks: Red Hills junction (NH16–Chennai Bypass), Puzhal (Red Hills) lake

Sheets for a typical wardrobe

Worked example for Red Hills (typical estimate): A wardrobe 6 ft wide, 7 ft tall and 2 ft deep needs about 6 sheets of 8 × 4 ft (192 sq ft) of 18 mm; at our rate of ₹55 per sq ft that is about ₹10,560 (supply only). Your carpenter's figures come first.

Typical figures from our Plywood guide, to start from:

Typical estimate: Using 8 × 4 ft sheets (32 sq ft each) and about 15–20% cutting waste; your carpenter's cutting list is the real figure.

  • Wardrobe 6 ft wide, 7 ft tall, 2 ft deep with three shelves, one partition and shutters: about 144 sq ft of 18 mm
  • That is about 6 sheets of 18 mm with waste
  • Back panel 6 × 7 ft: 2 sheets of 6–8 mm

Plywood: what it is, types, checks and quantities

Questions buyers ask

Plywood in Red Hills: questions

Do you also supply plywood to Padiyanallur, Sholavaram and Kavankarai?

Yes. We take plywood orders for sites in Padiyanallur, Sholavaram, Kavankarai, Pammadukulam, Vilangadupakkam and Vadaperumbakkam as well, at the same rate as Red Hills, with delivery outside our Chennai zones quoted per order, and the manufacturer ships it factory-direct to your site.

Who is the seller of plywood for a site in Red Hills?

M&B Chetty India is the seller: we take your order for Red Hills, the manufacturer ships it factory-direct to your site, and we bill it (per sq ft of sheet, supply only; GST not stated). The brand changes the price, so we confirm it with each order.

Is BWP better than BWR?

For wet areas, yes: BWP glue withstands boiling water, while BWR resists it to a lower standard. BWR is adequate for kitchen wall units and semi-dry areas; use BWP under sinks and in bathroom vanities.

Is 303 MR grade plywood good or bad?

Good for what it is meant for: furniture and wardrobes in dry rooms. MR (moisture-resistant) glue tolerates humidity but not repeated wetting, so do not use it under sinks, in bathrooms or against damp outer walls.

Need plywood in Red Hills?

Call, WhatsApp or send the quote form with it filled in: we confirm the brand, the price and the date, and the manufacturer ships it direct to your site.

WhatsApp