Serving Chennai · Ponneri · Gummidipoondi · Tiruvallur · Avadi & the AP–TN border belt +91 90039 03003 WhatsApp Mon–Sat, 9:30 AM – 6:30 PM
Tirupati, Andhra Pradesh · from our crusher

6mm Jalli Price in Tada

6mm Jalli costs about ₹504 a ton delivered in Tada: ₹2,142 a unit (100 cft) or ₹21 a cft at 1.5 t/m³, with 5% GST. That is ₹230 ex-works plus ~₹250 transport for 60 km, and a full 18 MT load is about ₹9,072, royalty extra. Call or WhatsApp to book; the run takes about 2–2.5 hours.

₹504 / ton delivered, incl. 5% GST ~60 km from our crusher · 2–2.5 h by truck 1 load (~18 T) minimum order
WhatsApp
Small crushed grey stone chips of the 6 mm blue metal type, close-up — stock photo
6mm Chips · Tada
Delivered price

6mm Jalli price by quantity in Tada

Delivered price finder

6mm Jalli delivered to Tada

Pick how you buy it (per ton, per unit of 100 cft, per cft or per load) and how much: the delivered price and its breakdown change at once. Every figure is also in the full table below.

Common orders:
  • Delivered = ex-works rate + transport for ~60 km + 5% GST; royalty at actuals.
  • 1 unit = 100 cft ≈ 4.25 t of Blue Metal 6mm at a loose 1.5 t/m³.

Blue Metal 6mm delivered to Tada

1 × ton

Quantity≈ 1 t
Material (ex-works)₹230
Transport, ~60 km₹250
GST 5%₹24
Delivered price
₹504
per ton delivered, incl. 5% GST
WhatsApp

Royalty and levies extra, at actuals. 1 unit (100 cft) ≈ 4.25 t; a tipper load is 18 MT.

See all prices and quantitiesPer ton, per unit (100 cft), per cft and per load: delivered first, then ex-works and transport
6mm Jalli delivered to Tada, by quantity
QuantityDelivered price (incl. 5% GST)Ex-worksof which transport (before GST)
1 ton (MT)₹504₹230~₹250
1 unit (100 cft ≈ 4.25 t)₹2,142₹978~₹1,063
1 cft (≈ 43 kg)₹21₹10~₹11
One 18 MT tipper load₹9,072₹4,140~₹4,500
Two loads (36 MT)₹18,144₹8,280~₹9,000

Unit and cft figures use our loose bulk density for Blue Metal 6mm: 1.5 t/m³, so 1 unit (100 cft, 2.83 m³) ≈ 4.25 t. Royalty and levies are itemised at actuals. Rates reviewed 2 October 2026.

Next question: how many loads do I need? Use the house quantity calculator, then price your exact quantity in the delivered-cost estimator.

6mm Jalli suppliers in Tada

M&B Chetty India supplies 6mm jalli chips in Tada from our Perindesam crusher and partner crushers in the belt. Our crusher at Perindesam (K.V.B. Puram mandal, Tirupati district) is about 60 km by road and 2–2.5 hours away for a loaded tipper. Every load is weighed on a weighbridge and travels with the GST invoice, weighbridge slip and AP e-transit pass.

Route: Perindesam → K.V.B. Puram → Satyavedu → Tada.

Intra-state AP movement; AP e-transit pass with every load.

About Tada

Tada sits on NH16 at the Andhra–Tamil Nadu border, with the Tada APIIC industrial layout and Sri City next door; Sullurpeta grows with them. Telugu-speaking buyers looking for "kankara" or "M sand" in Tada reach the same desk.

Building work in Tada: Tada APIIC industrial layout on NH16; Houses and shops in Tada town.

Tada (தடா) · Andhra Pradesh · Tirupati district · PIN 524401 · landmarks: Tada railway station, AP–TN border check post on NH16

Map

From our crusher to Tada

Map: Tada and our crusher at Perindesam

2 places on this map

Map data © OpenStreetMap contributors; tiles © OpenFreeMap and OpenMapTiles.

6mm Jalli specification

Fraction3.5–8 mm (trade '6mm chips'); tested as IS 383 10 mm single-size
StandardIS 383:2016 Table 7 (10 mm single-size) / MoRTH 510 chips
Also called6mm chips, baby chips, chips jalli, 6mm jalli · Tamil: 6 எம்எம் ஜல்லி
1 unit (100 cft, 2.83 m³)about 4.25 t at 1.5 t/m³, loose
Sold byWeighbridge tonne, 18 MT per 10-wheeler tipper

Blue Metal 6mm: full specification, uses and checks

How to order 6mm Jalli in Tada

  1. Send the quantity (tonnes, units or loads), the site location in Tada and the date: call +91 90039 03003, WhatsApp +91 90039 03003 or use the quote form.
  2. We confirm the delivered price for about 60 km and book a tipper slot (2–2.5 h run from the crusher).
  3. The tipper is weighed on a weighbridge and leaves with the GST invoice, weighbridge slip and AP e-transit pass.
  4. At the site, check the papers and the material before it is tipped. Minimum order: 1 load (~18 T).
Questions buyers ask

6mm Jalli in Tada: questions

What is the price of 1 unit of 6mm Jalli in Tada?

About ₹2,142 delivered, with 5% GST and before royalty. We count 1 unit (100 cft) of Blue Metal 6mm as 4.25 tonnes at a loose 1.5 t/m³, and the delivered rate to Tada is about ₹504 a ton; that is ₹21 a cft.

How much does 1 tonne of blue metal cost?

6mm Jalli delivered to Tada is about ₹504 a tonne with 5% GST: ₹230 ex-works plus about ₹250 transport for 60 km. Royalty is extra, at actuals.

Who supplies 6mm Jalli in Tada?

M&B Chetty India delivers 6mm jalli chips to Tada in 16–20 MT tipper loads from our Perindesam crusher and partner crushers in the belt; our crusher at Perindesam is about 60 km away (2–2.5 h by truck). Call +91 90039 03003 or WhatsApp +91 90039 03003 with the quantity and the site location.

How soon can a load reach Tada?

Book 24 to 48 hours ahead: loads are dispatched within two working days of confirmation, and the run from the crusher to Tada takes about 2–2.5 hours.

Need 6mm Jalli delivered to Tada?

Send the material, quantity and site location. Our sales desk in Gummidipundi calls you back within 15 minutes during desk hours to work out a delivered quote and a dispatch slot.

WhatsApp