Serving Chennai · Ponneri · Gummidipoondi · Tiruvallur · Avadi & the AP–TN border belt +91 90039 03003 WhatsApp Mon–Sat, 9:30 AM – 6:30 PM
Tirupati, Andhra Pradesh · from our crusher

P-Sand Price in Tada

P-Sand costs about ₹977 a ton delivered in Tada: ₹4,492 a unit (100 cft) or ₹45 a cft at 1.62 t/m³, with 5% GST. That is ₹680 ex-works plus ~₹250 transport for 60 km, and a full 18 MT load is about ₹17,577, royalty extra. Call or WhatsApp to book; the run takes about 2–2.5 hours.

₹977 / ton delivered, incl. 5% GST ~60 km from our crusher · 2–2.5 h by truck 1 load (~18 T) minimum order
WhatsApp
Heap of fine grey sand with a shovel — stock photo
Washed Plastering Sand · Tada
Delivered price

P-Sand price by quantity in Tada

Delivered price finder

P-Sand delivered to Tada

Pick how you buy it (per ton, per unit of 100 cft, per cft or per load) and how much: the delivered price and its breakdown change at once. Every figure is also in the full table below.

Common orders:
  • Delivered = ex-works rate + transport for ~60 km + 5% GST; royalty at actuals.
  • 1 unit = 100 cft ≈ 4.6 t of P-Sand at a loose 1.62 t/m³.

P-Sand delivered to Tada

1 × ton

Quantity≈ 1 t
Material (ex-works)₹680
Transport, ~60 km₹250
GST 5%₹47
Delivered price
₹977
per ton delivered, incl. 5% GST
WhatsApp

Royalty and levies extra, at actuals. 1 unit (100 cft) ≈ 4.6 t; a tipper load is 18 MT.

See all prices and quantitiesPer ton, per unit (100 cft), per cft and per load: delivered first, then ex-works and transport
P-Sand delivered to Tada, by quantity
QuantityDelivered price (incl. 5% GST)Ex-worksof which transport (before GST)
1 ton (MT)₹977₹680~₹250
1 unit (100 cft ≈ 4.6 t)₹4,492₹3,128~₹1,150
1 cft (≈ 46 kg)₹45₹31~₹12
One 18 MT tipper load₹17,577₹12,240~₹4,500
Two loads (36 MT)₹35,154₹24,480~₹9,000

Unit and cft figures use our loose bulk density for P-Sand: 1.62 t/m³, so 1 unit (100 cft, 2.83 m³) ≈ 4.6 t. Royalty and levies are itemised at actuals. Rates reviewed 2 October 2026.

Next question: how many loads do I need? Use the plaster calculator, then price your exact quantity in the delivered-cost estimator.

P-Sand suppliers in Tada

M&B Chetty India supplies P-Sand in Tada from our Perindesam crusher and partner crushers in the belt. Our crusher at Perindesam (K.V.B. Puram mandal, Tirupati district) is about 60 km by road and 2–2.5 hours away for a loaded tipper. Every load is weighed on a weighbridge and travels with the GST invoice, weighbridge slip and AP e-transit pass.

Route: Perindesam → K.V.B. Puram → Satyavedu → Tada.

Intra-state AP movement; AP e-transit pass with every load.

Who orders it in Tada: Local builders (Tada, Sullurpeta) (20mm, M-Sand, P-Sand).

About Tada

Tada sits on NH16 at the Andhra–Tamil Nadu border, with the Tada APIIC industrial layout and Sri City next door; Sullurpeta grows with them. Telugu-speaking buyers looking for "kankara" or "M sand" in Tada reach the same desk.

Building work in Tada: Tada APIIC industrial layout on NH16; Houses and shops in Tada town.

Tada (தடா) · Andhra Pradesh · Tirupati district · PIN 524401 · landmarks: Tada railway station, AP–TN border check post on NH16

Map

From our crusher to Tada

Map: Tada and our crusher at Perindesam

2 places on this map

Map data © OpenStreetMap contributors; tiles © OpenFreeMap and OpenMapTiles.

P-Sand specification

GradingIS 1542 Table 1 (sand for plaster, % passing): 10 mm 100 · 4.75 mm 95–100 · 2.36 mm 95–100 · 1.18 mm 90–100 · 600 µm 80–100 · 300 µm 20–65 · 150 µm 0–15 (0–20 for crushed stone sand)
StandardIS 1542:1992 (sand for plaster) · IS 383 Zone IV
Also calledP sand, plastering sand, plaster sand, fine sand · Tamil: பி சாண்ட்
1 unit (100 cft, 2.83 m³)about 4.6 t at 1.62 t/m³, loose
Sold byWeighbridge tonne, 18 MT per 10-wheeler tipper

P-Sand: full specification, uses and checks

How to order P-Sand in Tada

  1. Send the quantity (tonnes, units or loads), the site location in Tada and the date: call +91 90039 03003, WhatsApp +91 90039 03003 or use the quote form.
  2. We confirm the delivered price for about 60 km and book a tipper slot (2–2.5 h run from the crusher).
  3. The tipper is weighed on a weighbridge and leaves with the GST invoice, weighbridge slip and AP e-transit pass.
  4. At the site, check the papers and the material before it is tipped. Minimum order: 1 load (~18 T).
Questions buyers ask

P-Sand in Tada: questions

What is the price of 1 unit of P-Sand in Tada?

About ₹4,492 delivered, with 5% GST and before royalty. We count 1 unit (100 cft) of P-Sand as 4.6 tonnes at a loose 1.62 t/m³, and the delivered rate to Tada is about ₹977 a ton; that is ₹45 a cft.

How much sand is 1 unit?

One unit is 100 cubic feet, about 2.83 m³. Of P-Sand that is about 4.6 tonnes at a loose 1.62 t/m³, about ₹4,492 a unit delivered to Tada with 5% GST.

Who supplies P-Sand in Tada?

M&B Chetty India delivers P-Sand to Tada in 16–20 MT tipper loads from our Perindesam crusher and partner crushers in the belt; our crusher at Perindesam is about 60 km away (2–2.5 h by truck). Call +91 90039 03003 or WhatsApp +91 90039 03003 with the quantity and the site location.

How much P-Sand for a typical job in Tada?

Typical estimate: about 9 MT for wall and ceiling plaster for a 1,000 sq ft house. That is 1 tipper load, about ₹8,789 delivered to Tada at today's rate. Your engineer's quantities come first.

How soon can a load reach Tada?

Book 24 to 48 hours ahead: loads are dispatched within two working days of confirmation, and the run from the crusher to Tada takes about 2–2.5 hours.

Do I need M-Sand or P-Sand for a house in Tada?

Usually both: M-Sand (Zone II, up to 4.75 mm) for concrete, PCC and brickwork mortar, and the finer P-Sand for wall and ceiling plaster. Delivered to Tada, M-Sand is about ₹814 and P-Sand about ₹977 per MT with GST. A full 16–20 MT load of each is the minimum order.

Need P-Sand delivered to Tada?

Send the material, quantity and site location. Our sales desk in Gummidipundi calls you back within 15 minutes during desk hours to work out a delivered quote and a dispatch slot.

WhatsApp